Language
Author: Smartweigh–Multihead Weigher
Maintenance of bagged nuts automatic packaging machine equipment 1. For your safety, please add a maintenance ground; 2. The inside and outside of the machine must be cleaned before and after work, and the parts that pass through the food must be strictly disinfected. 3. Before going to and from get off work every day, please check whether the oil level of the air source triplex oil storage tank is kept above 1/3. If it is less than 1/3, inject 20# pure engine oil to about 1/2 of the tank. 4. Take out the unused packaging film when leaving get off work to avoid bending the support tube. 5. Always check the screws in each part, and there must be no looseness; 6. Keep the photoelectric head clean at all times, and the electrical parts should be dust-proof and moisture-proof; 7. If there is material trapped in the vertical seal or horizontal seal during the start-up process, stop the machine and use a copper wire brush Clean the vertical seal or horizontal seal.
Author: Smartweigh–Multihead Weigher Manufacturers
Author: Smartweigh–Linear Weigher
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weigher Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weigher
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
