Language
Author: Smartweigh–Multihead Weighter
The automatic multihead weigher is now more and more widely used. With the widespread application of the automatic multihead weigher, more and more customers understand the benefits of the automatic multihead weigher. The automatic multihead weigher is used for high-precision weighing Heavy automation technology weighing system, but automatic multihead weigher has been used for a long time, and some common failures are inevitable. So what are the common problems with automatic multihead weighers? The following is a detailed introduction of Paike automation technology. 1. There is no information displayed on the touch screen of the operation panel. It is very likely that 1. The switching power supply is in poor contact. 2. The fuse in the main box is burned out. 3. The mobile phone charging cable is loose or dropped. 2. Automatic multihead weigher system software desktop display It is very likely that the old zero is due to 1. The object is light, and the net weight falls within the zero range. It should be set again according to the“Zero category”2. The weighing system feels zero. At this time, it can be adjusted according to the selection in the system software.“Fully automatic zero tracking”New project to deal with 3. What are the common problems of automatic multihead weigher caused by the loose charging cable of the sensor mobile phone and poor contact? 3. The data information vibrates greatly, and the abnormal probability of fluctuations is due to 1. The automatic multihead weigher pedestal screw is loose 2. The weight sensor is significantly affected, such as the central air-conditioning wind, cyclone, etc. 3. The road shakes and vibrates, such as the influence of the rotation of peripheral equipment 4. The conveyor belt is damaged by sticky objects 5. The weight sensor base has dirt deposits or stuck 6. The filter index is set too small. 4. The data information display information is abnormal. , the multihead weigher system software must be corrected again 2. The product specification is not selected correctly, click again according to“Convert items”, choose the matching product number of the supporting equipment to handle 3. The working temperature exceeds the range of the weight sensor and everything works normally. 4. The weight sensor sensor electronics are brittle or deformed. Common problems about automatic multihead weighers are for everyone. Send it here, the newly purchased automatic multihead weigher needs to check with the manufacturer if the product has any problems. No matter whether it is damaged or not, an inspection and maintenance of the machine must be done on time. If some common fault problems are really difficult to solve, find the manufacturer. , it will be more efficient.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
