Author: Smartweigh–Multihead Weighter
The automatic multihead weigher is one of the products produced by the Zhongshan Smart weigh manufacturer. You are familiar with the principle of the automatic multihead weigher and the faults encountered in the use of the automatic multihead weigher. The editor will take you to learn about the principle of the automatic multihead weigher and the working time of the automatic multihead weigher. Knowledge of causal analysis of encountered failures. There are 8 common failure causes in the general automatic multihead weigher operation: 1. Why is the equipment weighing prohibited? 1. Check whether other items touch the weighing tray; 2. Whether the equipment is calibrated, it can be calibrated from the beginning; 3. Whether there is wind blowing to the equipment; 4. Compare whether the static weighing and dynamic weighing are consistent, if not, then pass“dynamic learning”Make corrections. 2. Disassemble the device without action? 1. First check whether the power connection is normal; 2. If the power is normal, click the corresponding button in the fault detection“Remove Port”, to see if it works; 3. If no action is taken, please check whether the removal port in the removal port is selected correctly.
3. Are static weighing and dynamic weighing inconsistent? When the components of the object are in static and winter states, there is an error in the weighing result, which can be determined by“dynamic learning”Make corrections. 4. The conveyor belt does not work? 1. When all conveyor belts do not work: check the power supply; 2. When one or two sections do not work: check the motor drive by adjusting the motor and driver; 5. Conveyor belt problems 1. If the equipment works abnormally or If there is deviation in accuracy and speed, please check whether the conveyor belt of wearing parts has cracks first; 2. Check whether the conveyor belt is skewed, if there is skew, adjust the conditioning equipment at both ends until the conveyor belt stops without skew; 6. Accuracy and speed issues 1. Check for broken or skewed conveyor belts. Such problems can be replaced or adjusted to the normal direction before the test; 2. Check whether the operation interface and parameter settings are correct; for parameter settings, you can set the required values from scratch according to the manual, and use the tested product 10 times to check whether the accuracy is stable; 7. After dismantling or inspecting the equipment, properly reset the connectors and parts that have been dismantled and inspected.
After checking, please reset properly from the beginning. 8. Failures caused by non-equipment factors When sudden environmental changes, abnormal power supply caused by lightning or abnormal voltage, machine fall and impact, and direct failures caused by abnormal use, a comprehensive inspection must be carried out. Regular maintenance not only saves costs, but also keeps production running smoothly.
After reading some faults and cause analysis encountered when the automatic multihead weigher is working, we can solve it when we encounter the automatic multihead weigher failure in the future. Now, let's understand the working principle of the automatic multihead weigher. The automatic multihead weigher needs to set the speed of the feeding conveyor before working (you need to pay attention when setting the speed, during the working process of the multihead weigher, only one product can be placed on the weighing platform, so that the weighing result can be Accurate), and then when the product enters the conveyor, the system can identify and weigh the external signal, and in this process, the system will select the signal in the stable signal area for processing, so as to obtain the weight information of the product. Then, according to the required specifications, products with different weights are divided for screening. In the editor, I described the principle of automatic multihead weigher and the analysis of the failure causes encountered in the process of using automatic multihead weigher. In detail, everyone has a certain understanding of automatic multihead weigher.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Combination Weighter
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved