The lubrication and maintenance of the parts of the automatic granule packaging machine
The automatic granule packaging machine is suitable for rubber granules, plastic granules, fertilizer granules, feed granules, chemical granules, food granules, Quantitative packaging of metal particles sealed particle materials. So how is the packaging equipment we used for maintenance?
Inspect the machine parts regularly, once a month, to check whether the parts are flexible in rotation and wear, and if any defects are found, they should be repaired in time.
It takes a long time to stop the machine. Wipe and clean the whole body of the machine. Coat the smooth surface of the machine with anti-rust oil and cover it with a cloth.
Pay attention to the waterproof, moisture-proof and corrosion-proof of the electrical parts. The inside of the electric control box and the wiring terminals must be kept clean to prevent electrical failure.
When the equipment is out of use, flush the residual liquid in the pipeline with clean water in time, and wipe the machine in time to keep it dry and tidy.
The roller moves back and forth during work. Please adjust the M10 screw on the front bearing to the proper position. If the shaft moves, please adjust the M10 screw on the back of the bearing frame to the proper position, adjust the gap so that the bearing does not make a noise, turn the pulley by hand, and the tension is appropriate. Too tight or too loose can damage the automatic particle packaging machine. may.
In short, the maintenance and maintenance of the automatic granule packaging machine is very important to the production and development of the enterprise. If the packaging machine equipment can be maintained and maintained on a regular basis, To a large extent, the failure rate of equipment can be reduced, so we need to pay attention to it.
The maintenance of the automatic pellet packaging machine is essential for long-term use, especially the lubrication part of the machine parts:
1. The box part of the machine is equipped with an oil meter. All oil should be added once before starting, and it can be added according to the temperature rise and operating conditions of each bearing in the middle.
2. The worm gear box must store oil for a long time, and its oil level is such that all the worm gear invades the oil. If it is used frequently, the oil must be replaced every three months. There is an oil plug at the bottom for draining oil.
3. When the machine is refueling, do not let the oil spill out of the cup, let alone flow around the machine and on the ground. Because oil is easy to pollute materials and affect product quality.
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved