Introduction to the maintenance method of automatic granule packaging machine u200b

Introduction to the maintenance method of the automatic granule packaging machine

The correct maintenance and maintenance of the automatic granule packaging machine can be effective Extend the service life of the machine

The lubrication of the parts of the automatic particle packaging machine:

1. The box part of the machine is filled with oil Table, all the oil should be refueled once before starting, and it can be added according to the temperature rise and operating conditions of each bearing in the middle.

2. The worm gear box must store oil for a long time, and its oil level is such that all the worm gear invades the oil. If it is used frequently, the oil must be replaced every three months. There is an oil plug at the bottom for draining oil.

3. When the machine is refueling, do not let the oil spill out of the cup, let alone flow around the machine and on the ground. Because oil is easy to pollute materials and affect product quality.

Automatic particle packaging machine maintenance instructions:

1 , Check the parts regularly, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other movable parts are flexible and worn. If defects are found, they should be repaired in time, and they should not be used reluctantly.

2. The machine should be used in a dry and clean room. It should not be used in a place where the atmosphere contains acids and other gases that are corrosive to the body.

3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then install it, ready for the next use jobs.

4. If the machine is out of service for a long time, wipe the whole body of the machine to clean it, and coat the smooth surface of the machine with anti-rust oil and cover it with a cloth hood.