Automatic granule packaging machine_maintenance operation of automatic granule packaging machine

With the continuous economic development, there are many types of automatic granule packaging machines produced in China, and their functions, configurations and technologies are not very different. So how to choose an automatic granule packaging machine suitable for enterprise automated production? In fact, no matter which equipment you choose, the first comparison is quality and after-sales service. Product quality is directly related to the effectiveness of product packaging. How to increase the service life of the equipment after purchase?

Automatic particle packaging machine maintenance:

1. Power the equipment 30 minutes before work every day Perform preheating without turning off the power supply of the control cabinet during the continuous production season.

2. Before operating and debugging the packaging machine, users must be technically trained and familiar with the performance and operating methods of the packaging system.

3. Ensure that the packaging machinery and equipment are clean, remove dust and oil, remove dust and sticky substances accumulated in the electronic scale cavity and filling cylinder, do not rinse with water to dry the electronic scale and display control panel The door should be closed tightly.

4. On the other hand, do not hit the product with hammers, steel rods or hard, sharp objects, otherwise it will cause sparks and serious safety problems. On the other hand, the product is mainly a stainless steel thin-walled structure with inner and outer surfaces. After polishing, knocking is easily deformed, changing the shape of the wall and increasing the roughness of the wall, which increases the resistance to material flow and forms a retaining or sticky wall. If stagnation or blockage occurs, please be careful not to scratch the blade of the screw feeder when dredging with a wooden stick, shaking it gently with a rubber hammer, or poking it down.

5. Regularly check the integrity of the automatic particle packaging machine and ensure that the bolts and nuts (especially the sensor fixing parts) are not loose. Ensure that moving parts (such as bearings and sprockets) run smoothly. If abnormal noise occurs, check and repair it immediately.