How to solve the problem of automatic powder packaging machine

How to solve the problems of the automatic powder packaging machine

1. The cutting position of the automatic powder packaging machine is large when it is operating Deviation, the gap between the color mark is too large, the color mark positioning is faulty and the photoelectric tracking compensation is out of control. In this case, you can first re-adjust the position of the photoelectric switch. , Adjust the position of the paper guide so that the light spot coincides with the middle of the color code.

2. The packaging container was torn off by the automatic powder packaging machine during the operation. Once this happens, check the motor circuit to see if the proximity switch is damaged.

3. During the packaging process, the paper feed motor of the automatic powder packaging machine jams and does not rotate or it rotates out of control. It is also a very common fault. First check if the paper feed lever is stuck and start the capacitor. Whether it is damaged, whether there is a problem with the fuse, and then replace it according to the inspection result.

4. The packaging container is not tightly sealed. This phenomenon will not only waste materials, but also because the materials are all powders, they are easy to spread and pollute the automatic powder packaging machine equipment and workshop environment. With this situation, it is necessary to check whether the packaging container meets the relevant regulations, remove the fake and inferior packaging container, and then try to adjust the sealing pressure and increase the heat sealing temperature.

5. The automatic powder packaging machine does not pull the bag, and the pull bag motor is off the chain. The cause of this failure is nothing more than a line problem. The bag pull proximity switch is damaged, the controller fails, and the stepper motor The drive is faulty, check and replace them one by one.

Advantages of automatic powder packaging machine

1, powder The packaging machine is fast: adopts spiral blanking and light control technology;

2, the powder packaging machine has high precision: adopts stepping motor and electronic weighing technology;

3, powder packaging The packaging range of the machine is wide: the same quantitative packaging machine is continuously adjustable through the electronic scale keyboard adjustment and replacement of different specifications of the blanking screw within 5-5000g;

4, the powder packaging machine is suitable for chemical, food, Quantitative packaging of powder, powder, and powder materials in agricultural and sideline products industries; such as: milk powder, starch, pesticides, veterinary drugs, premixes, additives, condiments, feed, enzyme preparations, etc.;

5. The powder packaging machine is suitable for the quantitative packaging of powder in various packaging containers such as bags, cans, bottles, etc.;

6, the powder packaging machine is a combination of machine, electricity, light, and instrument, and is controlled by a single-chip microcomputer. It has the functions of automatic quantification, automatic filling, automatic adjustment of measurement error, etc.;