Language
Author: Smartweigh–Multihead Weigher
Automatic multihead weigher is now used more and more widely. With the widespread use of automatic multihead weigher, more and more users realize the benefits of automatic multihead weigher. However, automatic multihead weigher has been used for a long time, and it is inevitable that there will be some glitches. For this reason, don't worry, we can try to analyze it ourselves to find out the reason. Today, the editor will tell you about the analysis of the common problems of the automatic multihead weigher. I hope you can read this article carefully and bring you some help.
Analysis of common faults of automatic multihead weigher: 1) Why is the equipment weighing inaccurately? A. Check whether other items touch the weighing tray; B. Whether the equipment is calibrated and can be re-calibrated; C. Whether there is wind blowing against the equipment; D. Compare whether the static weighing is consistent with the dynamic weighing, if not accessible“dynamic learning”fix. 2) The reject device does not work? A. First check whether the power supply is connected normally; B. The power supply is normal, and then click the corresponding button in the fault detection“Eliminate ports”Whether to act; C. If not, check whether the correct port is selected in the reject port. 3) Static weighing does not match dynamic weighing? The weight of the object is in the static and winter states, and the result itself has errors, which can be passed“dynamic learning”to fix.
4) Conveyor belt not running? A. When all conveyor belts are not running: check the power supply; B. When one or two sections are not running: You can check whether the motor is driven by exchanging the motor and the driver; 5) Conveyor belt problems 1) If If there is abnormal operation of the equipment or deviations in accuracy and speed, please first check whether the conveyor belt of consumable parts is cracked; 2) Check whether the conveyor belt is deflected, and if there is deflection, adjust the adjustment devices on both sides until the belt has no deflection; 6) Accuracy and speed problems 1) Check whether the conveyor belt is cracked or deflected. For such problems, you can replace or adjust the conveyor belt to the normal position before testing; 2) Check the operation interface to see if the parameter settings are correct; parameter setting problems , you can reset the value that needs to be set according to the manual, and use the measured product 10 times to check whether the accuracy is stable; 7) After disassembling or inspecting the equipment, correctly reset the connectors and parts that were disassembled for inspection. After the inspection, Please reset correctly again. 8) Failure caused by non-equipment factors A comprehensive inspection is necessary for sudden environmental changes, abnormal power supply caused by lightning or abnormal voltage, machine fall, impact, and direct accidents that are not caused by normal use. Regular maintenance can not only save costs, but also make the production work go on normally.
Author: Smartweigh–Multihead Weigher Manufacturers
Author: Smartweigh–Linear Weigher
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weigher Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weigher
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
