Smart Weigh is committed to helping clients increase productivity at a reduced cost.
Language
Smart Weigh is committed to helping clients increase productivity at a reduced cost.
Author: Smartweigh–Multihead Weighter
The automatic multihead weigher is a dynamic weighing system in the high-speed production line. The automatic multihead weigher realizes high-precision weight detection and automatically rejects products that are too light or too heavy and do not meet production requirements. So how to use automatic multihead weigher on the production line? What problems should I pay attention to when using automatic multihead weigher? Let's take a look with Zhongshan Smart weigh editor! ! ! How to use the automatic multihead weigher ●Multihead weigher instruction manual Each brand of different series of automatic multihead weighers will have corresponding instruction manuals. Before using the automatic multihead weigher, the purchasing company must read it carefully and be familiar with the keys and functions of the product. Although equipment manufacturers will assign professional technicians to the customer's production line for professional training and guidance, the use of enterprises should not ignore the importance of automatic multihead weigher manuals.
●multihead weigher operator The operator of the automatic multihead weigher needs to undergo professional training and must know all the functions of the equipment well before they can operate the equipment and make the equipment operate in a good state. Of course, operators also need to understand some troubleshooting skills. When there is a problem with the equipment, they can find it in time and report it to the technician for maintenance, so as to reduce the loss as much as possible. ●The principle of correct use of multihead weigher The automatic multihead weigher is designed by integrating mechanical and electrical technology and considering the principle of safety. Improper use will also cause harm to people or third parties, or damage the equipment itself and other properties.
It can only operate if its technical and safety status is good, and any possible malfunctions and problems, especially safety problems, need to be ruled out immediately. While the device is only used for multihead weigher and static weighing, other applications are prohibited. Notes on using the automatic multihead weigher 1. The sensor of the automatic multihead weigher is a very sensitive measuring device and must be handled with care.
Vibration, crushing or dropping objects on the weighing table (weighing conveyor) should be avoided. Do not place tools on the weighing platform. 2. During the transportation of the automatic multihead weigher, the weighing conveyor must be fixed in its original position with screws and nuts.
3. The products to be weighed regularly enter the automatic multihead weigher, that is, the product spacing is as equal as possible, which is a prerequisite for reliable weighing. Please keep the photoelectric switch clean, such as dust, smudges or moisture condensed on the optical components, it may cause malfunction, please wipe these parts with a soft cloth or cotton cloth if necessary. 4. Please keep the weighing belt conveyor of the automatic multihead weigher clean, because stains or residues left by the product may cause malfunctions, you can use compressed air to blow away the dirt or wipe with a damp soft cloth.
5. If the automatic multihead weigher is equipped with a belt conveyor, please check the conveyor regularly. The belts must not touch any guards or transition plates (smooth plates between adjacent belts), as this would cause additional wear and vibration that could negatively affect accuracy. If guards are installed, check that they are in good condition and in the correct location.
Worn belts must be replaced in time. 6. If the automatic multihead weigher is equipped with a chain conveyor, check the guards regularly to make sure they are in good condition and installed in the correct position. 7. When installing a rejector with an independent base, or a rejector with an independent bracket (post), please ensure that the foot screws or the bottom plate are firmly fixed on the ground, which can reduce disturbing vibrations.
8. Keep spare parts in stock, especially spare parts that are prone to wear, which can shorten the downtime due to damaged spare parts. The above is the question about how to use the automatic multihead weigher and the related issues of the automatic multihead weigher shared by Zhongshan Smart weigh editor. If you have any questions about automatic multihead weigher, you can contact us.
If you want to know about our automatic multihead weigher products, you can also browse directly: https://www.jingliang-cw.com/zdjzc.html.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
