Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Language
Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Author: Smartweigh–Multihead Weighter
The basic principle and application expertise of multihead weigher The multihead weigher belongs to the tension and pressure sensor, which is commonly used in the accurate measurement of static data and dynamic accurate measurement. 1. The definition of multihead weigher fully considers the gravitational acceleration (g) of the application address and the buoyancy (f) of gas water, according to the conversion of one of the accurately measured (quality) into the other accurately measured (output). ) to accurately measure the quality of the force sensor. 2. The basic concept of multihead weigher Polyurethane elastomer (vibration isolator, more sensitive beam) causes elastic deformation under external force, so that the resistance strain gauge (transformation component) pasted on its surface also causes deformation, and the resistance strain gauge deforms After that, its resistance value will change (expand or decrease), and then the resistor will be converted into an electronic signal through a relatively accurate measurement of the power supply circuit, and then the whole process of converting the external force into an electronic signal is completed.
It is not difficult to see that resistance strain gauges, polyurethane elastomers and test power circuits are many key parts that cannot be lacking in a resistor strain force multihead weigher. These three levels are briefly described below. 1. Resistance strain gauge The resistance strain gauge is a piece of electrical heating wire mechanical equipment spread over a substrate made of organic materials, that is, a resistance strain gauge.
One of his key main parameters is the dexterity index K. When his two sides are subjected to F force, it may stretch, in other words cause deformation. Assuming that it is stretched, its cross-sectional area becomes smaller, that is, its cross-sectional circular semicircle decreases.
The relationship between the resistance elastic coefficient of the resistance strain gauge (the relative change of the resistor) and the elongation of the heating wire (the relative change of the length and the short) is proportional. It must be pointed out that the size of the sensitivity index K value is a parameter determined by the characteristics of the raw material for making the metal heating wire. It has nothing to do with the appearance and size of the resistance strain gauge. The K value of different raw materials is generally in the 1.7—3.6 Intermediate; the next K value is a dimensionless quantity, that is, it has no dimension. In engineering mechanics, ΔL/L is called the strain force, denoted as ε, and it is often used to indicate that the ductility is very large, which is very inconvenient. It is often used as one millionth of the enterprise, denoted as με.
2. Polyurethane elastomer Polyurethane elastomer is a part with a unique appearance. It has two functions. First, it bears the external force of the multihead weigher, which causes a recoil force to achieve a relative balance; The resistance strain gauge attached to this area is ideal for the daily task of transforming the strain force and electronic signal. 3. Inspection of the power supply circuit The function of the inspection of the power supply circuit is to convert the resistor of the resistance strain gauge into a working voltage output.
Because the Wheatstone bridge has many advantages, such as being able to suppress the harm of temperature change, suppressing the influence of side force, and being able to easily deal with the compensation problem of the multihead weigher, the Wheatstone bridge has been widely used in the multihead weigher. use. Since the arm bridge circuit such as the full accumulation chain is the most sensitive, the main parameters of each arm are the same, and the hazards of various influences are very easy to offset each other, so the multihead weigher uses the full accumulation chain and other arm bridge circuits.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
