Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Language
Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Author: Smartweigh–Multihead Weighter
How to clean corn starch packaging machine Corn starch packaging machine is used in many industries, such as food flour, intestinal powder, milk powder, coffee powder, etc., and daily chemical products such as washing powder, defoaming powder, heavy calcium powder Wait. No matter what powder materials are packaged, they must comply with food QS and pharmaceutical GMP hygiene standards. Therefore, the corn starch packaging machine should be cleaned regularly.
So, how to clean the corn starch packaging machine? The whole packaging process of the corn starch packaging machine from feeding to finished product output, every link must be cleaned, we can follow the reverse process, that is, from finished product output to feeding. Cleaning utensils: sterilized clean rags; thick and thin brushes; cleaning liquid (it is strictly forbidden to contain strong acids and alkalis, and it is not corrosive to the material but is easily dissolved physically, and there is no residue). 1. Cleaning of the screw and material cup Loosen the fastening screws after the hopper bracket, remove the material cup and screw, wipe off the powder adhered to the screw and the material cup with a sterilized clean rag, and then clean with cleaning solution Until the surface is free of any attachments, dry it or place it in a non-toxic and non-polluting state to dry naturally.
2. Cleaning of the hopper Loosen the fastening screws and hopper hooks behind the hopper bracket, so that the hopper slides down to the position where the cleaning tools can move freely, lock the fastening screws behind the hopper bracket, and use sterilized clean Wipe off the powder adhering to the silo and the feeding port with a rag, then clean it with a cleaning solution until there is no attachment on the surface, and dry it or place it in a non-toxic and non-polluting state to dry naturally. 3. Cleaning of the silo cover Use a sterilized clean rag to wipe off the powder adhering to the silo cover, then clean it with cleaning solution until the surface is free of any attachments, and dry it or place it in a non-toxic and non-polluting state Air dry naturally. 4. Cleaning of the long shaft Loosen the screws on the panel, remove the panel, use an Allen wrench to unscrew the screws that fasten the long shaft and the input small shaft, remove the long shaft from the lower end, and wipe it with a sterilized clean rag Remove the powder adhering to the silo and the feeding port, then wash it with a cleaning solution until there is no attachment on the surface, and dry it or place it in a non-toxic and non-polluting state to dry naturally.
5. Cleaning of the dust cover Remove the screws that fix the dust cover, wipe off the powder adhering to the silo and the feeding port with a sterilized clean rag, and then clean with cleaning solution until the surface is free of any attachments, and Dry or place in a non-toxic and non-polluting state to dry naturally. 6. Cleaning of the stirring frame and stirring blade Remove the screws that fix the stirring frame and stirring blade, wipe off the powder adhering to the dust cover with a sterilized clean rag, and then wash with cleaning solution until the surface is free of any adhesions. It is dried or placed in a non-toxic and non-polluting state to dry naturally. 7. For cleaning of each fastening screw, wipe with a sterilized clean rag or use a sterilized clean brush to remove the powder adhering to each fastening screw, and then soak and clean with cleaning solution until the surface is free of any attachments , and dried or placed in a non-toxic and non-polluting state to dry naturally.
8. Cleaning of machine tools Use a sterilized clean rag to wipe off or use a sterilized clean brush to remove the powder adhering to each machine tool, then soak and clean with cleaning solution until the surface is free of any attachments, and bake it. Dried or placed in a non-toxic and non-polluting state to dry naturally. 9. Use sterilized gloves and mechanical tools to reset according to the original installation position. 10. Clean the exterior of the whole machine with a sterilized clean rag or wipe off the powder adhering to the whole machine with a sterilized clean brush, then soak and clean with cleaning solution until the surface is free of any attachments, and dry Or place it to dry naturally in a non-toxic and non-polluting state.
11. Simple cleaning For packaging materials whose characteristics are similar, similar or the same. And the two materials do not have chemical changes in contact and do not affect various properties of the materials in the rear packaging, and simple cleaning can be used. Use the three ports of the feeding port, the feeding port and the material level cover to clean the silo and cover.
First use a sterilized clean rag to wipe off or use a sterilized clean brush to remove the powder adhering to each machine, then soak and clean with cleaning solution until the surface is free of any attachments, and dry or place it in a non-toxic Air-dry naturally in a non-polluting state.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
