Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Language
Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Author: Smartweigh–Multihead Weighter
The multihead weigher is a device that brings great convenience to everyone's work. With the use of high-speed multihead weighers, more and more users realize the benefits of multihead weighers, but after using multihead weighers for a long time, some failures will inevitably occur. Don't worry about this, we can first try to analyze it and find the reason.
The editor will tell you about the common failure causes of multihead weigher. I hope this article can bring you some help. Analysis of common failure causes of multihead weigher: ●Why is the equipment weighing inaccurate? A. Check whether other items touch the weighing tray; B. Whether the equipment is calibrated and can be re-calibrated; C. Whether there is wind blowing against the equipment; D. Compare whether the static weighing and dynamic weighing are consistent, if not accessible“dynamic learning”Correction. ●The rejection device does not work? A. First check whether the power supply is connected normally; B. The power supply is normal, and then click the corresponding button in the fault detection“culling port”Whether to act; C. If it does not act, check whether the correct culling port is selected in the culling port.
●Static weighing does not match dynamic weighing? The weight of the object is in two states of static and winter, and the result itself has errors, which can be passed.“dynamic learning”to correct. ●Conveyor belt not running? A. When the conveyor belt is not running: check the power supply; B. When one or two sections are not running: You can check whether the motor is driven by reversing the motor and driver; If the conveyor belt is faulty, if the equipment is not working For normal operation or deviations in accuracy and speed, please first check whether the conveyor belt of consumable parts is cracked; check whether the conveyor belt is deflected. If there is deflection, adjust the adjustment devices on both sides until the belt does not deflect; Check for accuracy and speed problems Whether the conveyor belt is cracked or deflected, such problems can be replaced or adjusted to the normal position before testing; check the operation interface to see if the parameter settings are correct; if there is a problem with the parameter setting, you can reset the value to be set according to the manual , Use the measured product for 10 times to check whether the accuracy is stable; ● Correctly reset the connectors and parts removed for inspection after disassembling or inspecting the equipment. After the inspection, please reset it correctly. A comprehensive inspection is necessary for failures other than equipment factors such as sudden environmental changes, abnormal power supply due to lightning or abnormal voltage, falls or shocks of equipment, or direct causes of accidents that are not caused by normal use.
Regular maintenance can not save costs, but more to make production work normally.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
