Language
Author: Smartweigh–Multihead Weighter
The key to the installation of the multihead weigher lies in the appearance design of the multihead weigher ① Immediately pull out the two sides of the left and right external threads vertically or horizontally to measure the tensile force. ②A section is fixed on the machine equipment according to the threaded hole, and one end is used for pressing (just like the application in the test punching machine, the force in the pressure direction is measured immediately) Immediately, the bottom end of the sensor is fixed on a certain object or machine equipment On, fixed and not dead, immediately press the bearing force according to the top end, generally used in many places to measure the force. Fix the outlet end of the sensor group on the machine according to the screw, and the other end is used to bear the force and diastolic pressure.
PS: When the cantilever beam sensor is installed, the middle position must be suspended in the air, one end is fixed, and the other end bears the force. ①Fix the bottom end of the sensor on the machine according to the eight small threaded holes, and the pressure can be measured immediately to the diastolic pressure. ② Pull out according to the large threaded hole in the middle to measure the tensile force.
①Fix the outgoing end of the sensor group on the machine according to the screw, and the other end is used to bear the force and apply the diastolic pressure. (Note that when the metal bellows sensor is installed, the middle position must be suspended in the air) One end of both sides is fixed for a period of force. ②You can also fix one end and pull one end out to measure the pressure.
According to the buried hole installation on the machine and equipment, the radial bearing force is selected. The accumulation and release chain multihead weigher is generally used on electronic platform scales or electronic truck scales. The base is immediately fixed on the road surface or thick steel plate, and the top can bear the force immediately according to the surface. Fix the bottom end of the sensor in a certain object or machine equipment, and fix it to death. Immediately press the upper end to bear the force. Generally, there are many force measuring places that are limited in indoor space.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
