Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Language
Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Author: Smartweigh–Multihead Weighter
The multihead weigher consists of a weighing conveyor controller and an in and out conveyor. The multihead weigher is often used in the production workshop, so what problems are often encountered in the application of the multihead weigher? Let's take a look. Cleaning of the multihead weigher Cut off the power supply of the multihead weigher and unplug the power cord.
Wet the gauze, wring it dry, put it in a small amount of neutral cleaning solution, use it to clean the weighing pan, and display the main parts of the weighing such as the filter screen. The calibration of the multihead weigher checks whether the scale body is normal. If it is angled, adjust the proportional foot so that the blister is centered.
The printer of the multihead weigher is cleaned and cut off the power supply, open the plastic door on the right side of the balance, hold the plum handle on the outside of the printer, and drag the printer out of the balance. Release the print head according to the spring of the front end of the printer, gently wipe the print head with the special print head cleaning pen attached to the weighing fitting, remove the dirt on it, remove the cap, cover the cleaning pen to prevent the volatilized liquid, then wait for two minutes until completely The cleaning liquid of the print head evaporates, then close the print head and the printer. Push it into the scale body, close the plastic door, test it with electricity, print it clearly, and it can be used normally.
Initialization of the multihead weigher The multihead weigher has the functions of zero tracking and power-on clearing. It can clear the foreign objects on the weighing pan when it is turned on, and ensure that the scale is turned on and used when there is no wind around. If there is a little weight display after turning on, you can press the“clear”key to return the scale to zero. During the weighing process, the multihead weigher should ensure that no foreign objects touch the sensor around the scale, and the bottom of the sensor should also be clean and free of foreign objects, otherwise it may cause problems such as inaccurate weighing. The above is all the content introduced by Zhongshan Smart weigh for you, I hope it will be helpful to you.
If you want to know more, you can browse our website, we will provide you with more professional information.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
