Single chamber vacuum
packaging machine according to the basic purpose can be divided into the following three categories:
1, food vacuum
packaging machine.
Such vacuum packaging machine to control the temperature should be in front of the vacuum packaging, equipment with cooling system, thus set a few higher requirements.
2, medicine, vacuum packaging machine.
This kind of vacuum
packing machine should be kept with can make the product longer vacuum form;
Because of medical vacuum packaging machine should be in the clean workshop requirements used in high places, so this kind of vacuum packaging machine can also be applied to the aseptic requirements of food packaging, in order to achieve good effect.
3, electronic product vacuum packaging machine.
Electronic product use vacuum packaging machine can rise to internal metal processing parts of moisture, the effect of anti-oxidation discoloration.
4, tea vacuum packaging machine.
This is a set of weighing, inner and outer
packing machine.
Vacuum packaging machine marks the birth of the domestic tea tea packaging level a big step, truly achieve the tea packaging standardization.
single chamber vacuum packaging machine maintenance method
1, single chamber vacuum packaging machines should be in the temperature -
10℃本;
Around 50 ℃, relative humidity is not more than 85%, no corrosive gas in the air, no dust, no explosive dangerous environments.
Like
packing machine and shrinking machine, the vacuum packaging machine for three-phase 380 v power supply.
2, for the vacuum packing machine to ensure the normal work of the vacuum pump, vacuum pump motor are not allowed to reverse.
Should always check the oil level, oil level is normal 1/2 - oil window
Three-fourths (
No more than)
, when the vacuum pump with water or oil color black, a new oil should be replaced at this time,
Generally one or two months to replace a continuous work, with 30 # 1 # vacuum gas or gasoline, oil can also)
。
3, impurity filter should often unpick and wash,
General 1 -
2 months cleaning, such as packaging fragmented objects should shorten the cleaning time)
。
2-4, continuous work
3 months should open the back cover 30 for sliding parts and switch touch add lubricant, on each connection activity place of heating rod should be according to the condition of using lubrication.
5, the decompression, filtration, oil mist sanlian 24 should regularly check and ensure that the oil in the oil mist and oil cup (
Sewing machine oil)
Without water, the filtering cup.
6, heating, silica gel to keep clean, must not with foreign body, so as not to affect the sealing quality.
7, heating rods, heating the sticky paste insulation effect on the second floor, when there is any breakage should be replaced in a timely manner, so as to avoid short circuit.
8, the user should bring along their own air supply and inflatable air, vacuum packaging machine working pressure is set to 0.
3 mpa, more appropriate, without special circumstances not adjust too much.
9, vacuum packaging machine in the process of handling are not allowed to tilt place and the impact, more can't put down handling.
10, single chamber vacuum packaging machine must have a reliable grounding device when installation.
11, it is forbidden to put hand in heating rods, in case of injury in emergency immediately cut off power supply.
12, ventilation before electricity at work, when stop after the first power to snuff out.
weigher are all following the most compatible manufacturing regulations.
Smart Weigh Packaging Machinery Co., Ltd provides which will help you checkweigher in a durable and reliable way. To learn more, go to Smart Weighing And Packing Machine.
Smart Weigh Packaging Machinery Co., Ltd offer various lines of products in line with international standards along with professionals who can offer suitable solutions pertaining to the existing problem in
multihead weigher weigher.
Smart Weigh Packaging Machinery Co., Ltd integrates research streams on team diversity and knowledge boundaries, and present a framework that considers the kinds of specific knowledge boundaries that must be spanned to achieve high-level, cross-boundary teaming.
