The operation process of the fully automatic multihead weigher

Author: Smartweigh–Multihead Weighter

The main interface of the fully automated multihead weigher operation steps is the normal production and processing check-weighing application page, which is used to start and stop the check-weighing conveyor belt, enter the basic parameter page, display the basic information of the information product, and display the information product information, etc. Industrial production automation technology. First, just start the operation process.

Connect the power transformer, rotate the transfer switch, turn on the power switch, plug in the electrical cabinet and touch the display screen to display the reset page. The top of each page is the USB plug-in mark, the multihead weigher specification model and time display; the black and gray display area is the current manufacturing checkweigher product name, net weight information content area, unit conversion information content area and multihead weigher status display area ; The middle is the current checkweighing rate, the current actual checkweighing rate and the checkweighing data information display information to carry out data analysis; the bottom is the operation process of the multihead weigher and the function buttons of the basic parameters related to the checkweighing. Technician log in today product newly created product key basic parameters just started checkweighing data analysis shutdown select product.

Appropriate time basic parameters can effectively assist customers to inquire about production and processing inspection results, changes in basic production and processing parameters, and content of warning information, which is beneficial to improve the pass rate and production and processing rate of production and processing, and reduce the cost of cost products. Today's special checkweighing ratio and today's checkweighing ratio setting represent working within the scope of the effective checkweighing ratio; the larger the ratio, the greater the use of the effective checkweighing ratio, but it is not necessary to be better and stronger. The increase checkweighing ratio of , intentionally increase the checkweighing ratio to reduce the checkweighing value. The net weight display area of ​​the checkweighing scale displays the net weight value of the timely information content of the information stop situation, and the information content of the actual operation checkweighing situation.

Second, the operation process of clearing. Assuming that when the weighing is stopped, the multihead weigher touches the display to display, and the net weight value is not zero (zero is marked as erasing), click“clear”Carry out the actual operation of clearing the weighing platform, so that the net weight value is displayed as zero in time, and the zero mark is bright at this time. If the multihead weigher shows that the net weight will not change, the stable flag will be lit, otherwise the stable flag will be eliminated (the smooth flag is only related to the net weight status, and has nothing to do with the actual operation of the multihead weigher and the size of the net weight value).

3. Start the actual operation in detail. Touch the screen bit by bit“start up”multihead weigher, the checkweigher motor promotes the rotation of the checkweigher belt, and the operation on the touch screen is marked as“in operation”In this case, the checkweighing operation can be started at this time. Fourth, stop the specific operation.

Press and hold on the touch display“stop”key to stop the check-weighing belt and carry out the whole process of check-weighing. At this time, the actual operation on the touch screen is marked as“stop”Happening. The specific operation status after standby. Turn the rotary power switch to the off position, the touch screen will disappear, and the power transformer will be disconnected.

The release operation process can only be carried out for the goods that are not checked on the balance scale. Sixth, account login. Touch the original page under the display, touch“product”or“set up”The account password box pops up, enter a 6-digit user name and password, click“clear”The 6-digit original login password of the registrant is“000000”.

Seventh, product selection and new creation. Click on the main interface“product”Go to the product page, first click the product that is necessary for the center of the product, and then click“Choose a product”Select a product, then click“withdraw”Go to the main interface, then click“start”for checking weighing. After a successful product selection, the current number information displayed in the upper right corner of the product page is the serial number of the currently selected product.

The updated product number cannot be selected in the entire multihead weigher operation process; the multihead weigher defaults to the product number screened out before (stop running or the multihead weigher is powered off). 7.1 The basic parameters of the newly created product are on the product page, click“Choose an item”, automatically jump to“Product basic parameters”page, plus the basic parameters of the new product, the new item number will be sequentially added to the existing products today, so there is no need to select the item number. The whole process of multihead weigher operation and check weighing cannot add a new product number; the newly added product variable types are all the default settings of the system, and must be set according to the actual basic parameters of the product and production and processing regulations.

7.2 Change the basic parameters of the product. On the product page, select the product whose basic parameters must be changed, and click“Product basic parameters”Go to the product basic parameters webpage, and make changes to the basic parameters of the selected product (the newly selected product will immediately jump to the product basic parameters webpage). The specification model indicates that the net weight is the net weight of the product to be tested, and the upper and lower limit values ​​are the allowable error of qualified products; if the product packaging design does not need to accurately measure the net weight, the net weight on the product packaging box can be loaded into the specification model to indicate In the net weight column, the specification model indicates that the net weight column should be filled in.

The product number is automatically generated by the system, and the belt angular velocity is calculated from the inspection rate, which changes with the inspection rate and cannot be filled in (the belt angular velocity should be consistent with the angular velocity of the front and rear development and delivery mechanisms). The reason for the deviation of the net weight of the metrological verification is calculated by the dynamic adjustment amount. Under normal conditions, manpower modification is prohibited to prevent the cause of the deviation between the net weight of the metrological verification of the product and the actual net weight. When filling in the basic parameters of the product, pay attention to its value range. Generally, if the value is lower than the lower limit of the basic parameter range, the variable type will not change. If it is higher than the basic parameter range limit, the default setting will load the limit value of the basic parameter range.

7.3 Delete the basic parameters of the product. On the product page, select the product you want to delete, click“delete product”, delete the product, after deleting the product, the basic parameters of the following product will be removed in order, and the product number will be removed. The multihead weigher cannot delete the product during the whole process of checking and weighing; in order to better prevent the basic parameters of the product from being deleted incorrectly, it is necessary to set the name of the product reasonably when setting the basic parameters of the product.

Author: Smartweigh–Multihead Weighter Manufacturers

Author: Smartweigh–Linear Weighter

Author: Smartweigh–Linear Weigher Packing Machine

Author: Smartweigh–Multihead Weighter Packing Machine

Author: Smartweigh–Tray Denester

Author: Smartweigh–Clamshell Packing Machine

Author: Smartweigh–Combination Weighter

Author: Smartweigh–Doypack Packing Machine

Author: Smartweigh–Premade Bag Packing Machine

Author: Smartweigh–Rotary Packing Machine

Author: Smartweigh–Vertical Packaging Machine

Author: Smartweigh–VFFS Packing Machine