Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Language
Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Author: Smartweigh–Multihead Weighter
The reason why the particle packaging machine cannot seal the air leakage and the solution 1. The temperature of the sealing mold of the particle packaging machine does not reach the corresponding temperature. You can increase the temperature of the sealing mold on the temperature control plate in the control panel. 2. The pressure of the sealing mold of the granule packaging machine is not enough, and the pressure of the sealing mold of the packaging machine can be adjusted. 3. The sealing mold of the packaging equipment is not aligned during sealing and the contact surface between the two is not flat. Adjust the flatness of the contact surface of the sealing roller of the horizontal seal, and then seal it to see if it is aligned, and whether the texture is deep or shallow.
4. Check whether the packaging machine has any material during sealing. If the material is clamped, you can adjust the cutting speed of the packaging machine on the touch screen. Usually, the above situations are relatively rare. All packaging machines of Zhongshan Smart Weigh Machinery need to be tested before leaving the factory, and they can be sent out after confirmation. If the user replaces the packaging film, it is necessary to make corresponding adjustments to achieve a firm seal and no leakage. The user can make adjustments after contacting the manufacturer according to the actual situation.
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Multihead Weighter Manufacturers
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
