Language
Author: Smartweigh–Multihead Weighter
1. Before application 1. The case of multihead weigher should have excellent grounding device. 2. Before plugging in the power plug of the sensor, turn off the power switch of the multihead weigher. 3. Before plugging in the serial communication socket, turn off the power of the multihead weigher, copier or computer.
2. Common problems of maintenance in application 1. This multihead weigher should avoid areas with corrosive vapors, liquids, conductive smoke and severe vibration, and pay attention to waterproofing. 2. The display screen is not suitable for application under the sunlight. 3. It is forbidden to use strong organic solvents (such as benzene, fluorobenzene oil) to clean the equipment shell.
4. The multihead weigher table has common failures in the whole process of application, and the switching power supply should be disconnected immediately. 5. The gap between the floor scale and the support frame is small, and the dirt in the gap should be removed on time to prevent harm to the weighing result. 6. It is strictly forbidden to accumulate dirt around and above the scale.
7. Pay attention to the induction lines around it when inspecting the floor scale safely. Pay attention to its feet. 8. For those who do not know the staff, it is strictly forbidden to touch all function keys on the display. You can press the reset key every time you use it. 9. It is forbidden to push and pull the door and oblique pressure in the measurement verification slot. Pay attention to whether the nearby (mainly conductive and flexible connection of left and right metal materials) pipelines are smooth and free of ground stress.
10. If the multihead weigher table has common failures in the whole process of application, the switching power supply should be disconnected immediately and sent to the company for maintenance. Non-professional workers do not have to repair themselves, in order to prevent higher damage. 11. The multihead weigher in the metrological verification tank should be calibrated on time (to be determined for 3 months, if there is any problem with the metrological verification, the calibration should be carried out anytime and anywhere) to ensure its accuracy and accuracy.
3. Actual operation and calibration 1. After the power-on self-test is completed, if the net weight is within the scope of the start-up zero setting, the net weight of the displayed information will be automatically reset to zero; otherwise, the net weight of the displayed information will not be easy to reset to zero. 2. The function key is set to zero. In the case of weighing, press→0← key, if the net weight is displayed, press→If the 0← key is set to zero, the net weight of the displayed information will be automatically reset to zero; otherwise, the net weight of the displayed information will not be easily reset to zero. 1. Actual operation of tare 1. Actual operation of peeling In the case of weighing, press→T← key, take the current net weight as the tare weight, the displayed information net weight is 0, the [GROSS] display light is off, and the [NET] display light is on.
2. The actual operation of tare cleaning In the case of weighing, press the C key to eliminate the tare weight, and display the information net weight, the [GROSS] display light is on, and the [NET] display light is off. Message reminder 1. Message reminder 1. Display information OFL: Overweight alarm system. If it is an unadjusted scale, the data signal will fade after calibration.
2. Display information LCErr: Indicates that the sensor is incorrect, or the sensor is not connected. 3. Display information Err01: indicates that the entered number is incorrect. 4. The display information Err02: The weighing platform cannot carry out net weight calibration without the amount of cargo loaded.
Calibration method 1. In addition, press the first reset key and the fourth confirmation key, the display will display a row of 0 information, press the fourth confirmation key, cal1 will appear, then press the second key to adjust cal1 to cal2, Press the fourth OK key to display the code, then press OK, in addition, the display shows 0, and the standard weight shows the net weight. Press the OK key to display a row of 0s, enter the net weight of the standard weight added, press the OK key to calibrate, and return to the scale Heavy web pages.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
