Automatic particle packaging machine repair and maintenance

Maintenance and maintenance of the automatic pellet packaging machine

1. When the roller moves back and forth during work, please adjust the M10 screw on the front bearing to the proper position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the proper position, adjust the gap so that the bearing does not make a noise, turn the pulley by hand, and the tension is appropriate. Too tight or too loose can damage the machine. .

2. If the machine is out of service for a long time, wipe the whole body of the machine to clean it, and coat the smooth surface of the machine with anti-rust oil and cover it with a cloth canopy.

3. Regularly check the machine parts, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other movable parts are flexible and wearable. Any defects should be repaired in time, and no reluctance .

4. The equipment should be used in a dry and clean room, and should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.

5. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then install it for the next time Be prepared for use.

Several advantages of the automatic powder packaging machine

1, due to the specific gravity of the material The error caused by the change of the material level can be automatically tracked and corrected;

2, the photoelectric switch control, only needs to manually cover the bag, the bag mouth is clean and easy to seal;

3, and the material The contact parts are made of stainless steel, which is easy to clean and prevent cross contamination.

4. The powder packaging machine has a wide packaging range: the same quantitative packaging machine can be adjusted and replaced with different specifications through the electronic scale keyboard within 5-5000g The material screw is continuously adjustable;

5. The powder packaging machine has a wide range of applications: powdery and powder materials with certain fluidity can be used;