Automatic vacuum
packaging machine is mainly talking about vacuum
packaging machine vacuum chamber is automatically swing, this is mainly for double chamber vacuum packaging machine or continuous vacuum packaging machine to explain, in general if customer does not explain the general double chamber vacuum packaging machine will be in accordance with the manual cover to determine.
Today is a brief introduction of automatic vacuum packaging machine operation procedures, we can want to remember!
1, according to the requirements of vacuum degree, adjust the extraction time relay.
But in order to ensure the sealing quality, it is necessary to make the vacuum degree is not less than -
-
0.
06 mbra, otherwise the sealing quality cannot guarantee, and it will burn out electric heating.
2, according to the packing materials to adjust thermal relay, control the heating time, generally in 1.
5 -
For 2 seconds.
3, according to the sealing quality and packaging materials, adjusting the cooling time relay, to achieve the best sealing effect.
(
More than 3 items used by professionals to adjust to the operator.
)
4, after the required packing products in plastic bags, on the sealing position, the article put the completed packet, electric heating must be at the base of the layering (
Stainless steel bar)
Press ok.
Open the power switch, vacuum pump, vacuum packaging items.
5, and then heated pressurized plastic bags sealing at the same time, then cooled in vacuum chamber back to gas, studio and rise to the other side.
Studio sets cover.
Complete a seal.
6, the equipment stop work immediately shut off the power switch, so as to avoid electromagnetic valve charged and burned for a long time.
7, must cut off power supply when the pump for any maintenance, cannot have any accident happens.
8, regularly check the oil level, such as the oil level is lower than the highest mark of oil window, you should go to the highest mark.
9, packaging machine in the process of work or handling, should always keep up position, are not allowed to tilt place, it is strictly prohibited to collision or impact, especially instrument, switch, etc.
10, work indoor should maintain clean, especially the sealing with hot seal and silica gel article above, below should not adhere to any foreign body, so as not to affect the sealing quality and service life.
11, actually for automatic vacuum packaging machine, we must have special personnel to operate after the purchase, so our manufacturer to formulate appropriate safety operation procedures, to the operation of the specialized personnel training, require all staff in accordance with the operating procedures.
Smart Weigh Packaging Machinery Co., Ltd is one of the world’s leading and most-trusted suppliers to the relevant markets.
Smart Weigh Packaging Machinery Co., Ltd’s mission is to provide high quality care and services to our members and to be profitable in the process.
Undoubtedly, weigher are made with advanced equipment.
