Language
Using a packaging machine for packaging can not only effectively improve production efficiency, but also reduce the work intensity of staff. Especially large packaging companies cannot do without packaging machines. This shows the importance of packaging machines. Once the packaging machine fails, it will greatly affect the work efficiency and corporate benefits, so today I will introduce the common faults and solutions of the packaging machine.
Fault 1: When using the packaging machine, the shrinking machine heats up slowly or fails to reach the operating temperature. It is necessary to check whether the holding points of the magnetic attraction switch are operating normally. The above situation will occur if one of the lines is not powered on. If it is not caused by the magnetic switch, you need to check the meter to see if the ohmic value of each phase and the packaging machine are the same. If there is no problem, it may be caused by a short circuit.
Fault 2. The film material shifts when the packaging machine is in operation. You can adjust the angle of the triangular plate. If it is the last deviation of the upper layer, you need to adjust the upper triangle plate in a clockwise direction, otherwise, adjust it in a counterclockwise direction.
I hope that the above explanation of Jiawei Packaging Editor can be helpful to everyone.
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
