At present, the weight tester is widely used in food, toy, electronics, daily chemical and pharmaceutical industries. It not only improves the quality of the product, but also improves the production efficiency, and is deeply loved by the majority of users. However, packaging manufacturers have found that some users will not install and debug the conveyor belt after purchasing the weighing machine. So today the editor of Jiawei Packaging brings you this knowledge sharing, let's take a look. 1. Installation of the conveyor belt of the weight detector 1. Rotate and adjust the nut of the weight detector to adjust the distance between the driving shaft and the driven shaft to an unadjustable position. 2. The packaging manufacturer reminds everyone to check the running direction of the conveyor belt of the weight checker first, and put the belt into the tray in the direction indicated by the arrow after it is correct. 3. Through the adjustment of the nuts on both sides of the weight detector tray, the belt maintains proper tightness, and at the same time, the belt is located in the middle of the tray. 2. Adjustment of the conveyor belt of the weight detector 1. Adjust the belt of the weight detector to an appropriate tightness through installation, and then put it in the equipment to run and observe the belt's operation. 2. If the belt is found in the middle of the pallet during the operation of the belt of the weight checker, no adjustment is needed. If you find that the belt of the weight checker is shifting to the left, you need to adjust it. 3. If there is friction between the belt of the weight detector and the side baffle, the editor of the packaging manufacturer Jiawei Packaging suggests that everyone immediately stop the operation of the equipment. About the installation and adjustment of the conveyor belt of the weight tester, the editor of the double-head packaging machine
manufacturer will briefly introduce it here. I hope this knowledge will be helpful to everyone.