The
packing machine, common fault causes and elimination method
Fault a: vacuum pump does not work or has serious noise reasons: 1, link up the phase indicator or fuse circuit;
2, vacuum pump inversion;
3, IC main contact point contact undesirable.
4, ISJ normally closed contact undesirable.
Method: 1, check the power supply into line or in molten core.
In phase 2, power.
3, adjust or change new.
4, adjust or change new.
Fault 2: no heat sealing reasons: 1, nickel chrome leather burn.
2, heat sealing back line is loose, open circuit.
3, 2 c, the main contact point contact undesirable.
4, 2 c didn't work.
Method: 1, to be renewed.
2, twist, and reconnect.
Pump valve 3, adjust or change new imports.
4, check the sj 1 2 sj normally closed normally open contacts are in good condition.
Fault 3: vacuum reason: not or no 1, the bags leak.
2, vacuum heat sealing no vacuum chamber.
3 and 1 dt core on gasket or magnetic seal leakage in the bubble.
Method: 1, the new packaging.
2, 1 dt doesn't work, repair or change new.
Fault 4: short of provisions limiting vacuum of reasons: 1, vacuum pump oil is too little, or pollution.
2, vacuum pump smoke or gas leakage.
3, pneumatic closed tightly.
4, 2 dt core card death reset.
Method: 1, gas or oil change.
2, cleaning vacuum pump, a new exhaust filter, check the check valve.
3, check the gas path, to eliminate leakage.
4, maintenance or cleaning.
Five: fault sealing surface uneven or corrosion reasons: 1, the temperature regulation is too high too long.
2, 2 sj doesn't work.
Method: 1, to readjust.
2, repair or change new (
Found that heat sealing delay very long, should be promptly cut off the power supply)
。
Fault 6: the sealing strength is not enough reason: 1, the low temperature regulating time is too short.
2, vacuum time adjustment is too short.
3, heat sealing chamber breakdown elimination method: 1, to readjust.
2, to readjust its & le;
- - - - - -
0.
08Mpa。
3, in the new.
However, with the increased prevalence of weigher, it has become far more affordable.
To know more about weigher
multihead weigher, visit
Smart Weighing And
Packing Machine for more reviews, tips and advice. Smart Weigh
Packaging Machinery Co., Ltd won't let you down for your options. visit!
checkweigher needs not be tedious anymore with the application of . So getting the right weigher can drastically promote weigher machine.
