A, temperature is too high, too slow, coated outer heat resistance is poor, the trace of the sealing will be focal repair method is to adjust speed, lower temperature, the change of membrane material.
Second, the knife is too high or too low, the packing speed quickly, push rod and the cutter is not synchronous, cutting DaoHui cutting on the product repair method is to reduce the packing speed, adjust the side sealing parts of the sealing knife center located right in the middle of product height.
Three, colour is too light in color film film drive slippage, color code tracking not open cut position deviation colour would appear, then repair method is to refer to the packaging machine
instructions, adjust its sensitivity.
In the man-machine dialogue interface, will track mode switch to & other;
Tracking cutting & throughout;
Four, solid state breaker burn, temperature control table damage, damage of thermocouple thermometer cannot control temperature, the repair method is replacement of galvanic couple, changing temperature control table, replace the heating element.
Five, too fast, coated inner poor heat sealing, can appear at low temperature sealing leak sealing or unstable, repair method is to make the slowing down of, to raise the temperature, out of thin film materials.
Six, air pressure, cylinder loose swinging rod, the heating temperature is low, hot pressing roller and driving roller is not parallel to the poor heat sealing would appear, repair method is to adjust the degree of parallelism, adjust the temperature and pressure to tighten.
An increasing dependence on the use of weigher checkweigher has made numerous changes in the multihead weigher
industry over the past decades.Smart Weigh Packaging Machine
ry Co., Ltd is the major weigher provider. weigher machine businesses need the right tools at their disposal in order to handle checkweigher. Smart Weighing And Packing Machine
is your best choice.
There are ample scientific evidence of reducing the risk of multihead weigher