Language
Author: Smartweigh–Multihead Weighter
1. Clean up the automatic multihead weigher platform: After disconnecting the switching power supply of the automatic multihead weigher, pull out the power plug. Wet the sand cloth and shake it dry, then dip it in a small amount of neutral detergent (such as ethanol), and use it to clean the weighing pan, the display information filter and the position of the scale body. The conveyor belt part that can be easily loaded and unloaded can be cleaned with warm water.
The warm water of about 45℃ is cleaned once a week, and the automatic multihead weigher conveyor belt is soaked in boiling water for five minutes up and down. 2. Clean up the copier (under the premise that the machine is equipped with a copier): disconnect the switch power supply, open the plastic door on the right side of the scale body, hold the osmanthus door handles on both sides of the copier, and pull the copier out of the scale body. According to the front-end development of the copier, loosen the print head, gently scrub the print head with the special type copy cleaning pen that is often included in the scale accessories, remove and wipe the end of the scrub, cover the pen cap to prevent the cleaning agent in the pen from evaporating, and then wait for 2 minutes before copying After the cleaning agent on the top of the head has fully evaporated, close the print head, push the copier back to the scale body, close the plastic door, plug it in for inspection, and everything can be used normally after the copy is clear.
3. Partial cleaning of the server: 1. Be sure to disconnect the switching power supply to avoid the risk of electric shock accidents, and then you can just start cleaning the fully automatic multihead weigher; 2. Select cleaning supplies, please use water or neutral detergent Clean with a damp cloth; 3. Do not use paint thinners and benzene and other solvents; avoid eroding items and human bodies, and harm the application; 4. Do not use metal brushes to avoid scratching items and human bodies; 4. Maintenance of automatic multihead weigher: 1. Environmental pollution caused by touch and fingerprint recognition, etc., can be completely removed by neutral detergent or soap, and solvent (ethanol, gasoline, toluene, etc.) can be used. etc.) sponge or cloth to scrub; 2. When the rust caused by the adhesion of cleaning drugs cannot be removed with neutral detergents, please use cleaning liquids; 3. Because the fans or The rust caused by salt, etc., can be scrubbed with sponge or cloth containing neutral detergent or soap solution, which can be easily removed and scrubbed neatly. The above 4 big ones will give you a detailed introduction to the maintenance process of the automatic multihead weigher. If you want to master a lot of information about the automatic multihead weigher, you can immediately, thank you for your full support! .
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved