Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Language
Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Author: Smartweigh–Multihead Weighter
When the multihead weigher is used, press the fast feeding and slow feeding function keys respectively to see if the fast and slow feeders are in position. For the auger type and belt type feeding mechanism, look at the forward rotation of the feeder, and observe whether the brake pedal and the forward rotation indicator are the same. If the brake pedal is suitable, it can be rotated continuously for a period of time to see if everything is working properly.
Touch the bag-clamping sensor frequently, and check whether the air cylinder of the bag-clamping car relay is in the posture; after touching the main switch of the bag-clamping power supply, the bag-clamping mechanism is extended under the function of the bag-clamping car relay and the cylinder. There is a bucket-type retry scale bucket door (loading door) auto relay posture. Press the lower discharge port, and then press the next button to close the store to see if the scale bucket door auto relay cylinder can promote the relative posture of the scale bucket door, and whether the posture direction meets the requirements.
The operation process must be carried out in this relatively dry geographical environment with good air circulation, and there must be no dirt near the mechanical equipment. It is necessary to do a good job in the grounding system of the packaging scale. Under normal circumstances, it is relatively easy for the instrument equipment to have tip discharge. If it cannot be eliminated immediately, it is relatively easy to damage the mechanical equipment.
Do a good job of sunscreen and waterproof. When the sun shines on the black-gray surface of the instrument panel of the packaging scale mechanical equipment, it is relatively easy to damage the mechanical equipment, and, if the air humidity is high, it will also cause necessary corrosion to the mechanical equipment. Therefore, in the In the actual application process, a lot of attention must be paid to these aspects. The instrumentation equipment of the multihead weigher is the top priority for everyone to maintain.
Assuming that there is a collision with the dashboard in the car, or a fall, there is a possibility that the dashboard in the car will be damaged. To master, the in-car dashboard of the packaging scale is very sensitive.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
