Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Language
Since 2012 - Smart Weigh is committed to helping clients increase productivity at a reduced cost. Contact us Now!
Author: Smartweigh–Multihead Weighter
The multihead weigher is a commonly used weighing equipment in the production workshop. Generally, the working time is relatively long. The multihead weigher will inevitably have problems under long-term work. So how do we troubleshoot and repair when the multihead weigher has problems. Multihead weigher maintenance method Clean the scale body Cut off the power and unplug the power cord. Wet the gauze, wring it dry, and then dip it in a little neutral cleaning solution to clean the weighing pan, display filter and other parts of the weighing body.
Note: Do not use any chemical solvent for cleaning. Avoid splashing water into the scale body during the cleaning process. If it accidentally spills into the scale body, you must wait for the water to dry before turning on the power, otherwise it may cause an electric shock accident or damage the device. Multihead weigher maintenance method Leveling correction Check whether the scale body is normal, if it is inclined, please adjust the scale feet, so that the blisters are placed in the center. Multihead weigher maintenance method to clean the printer Cut off the power supply, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body.
Press the spring on the front of the printer, release the print head, gently wipe the print head with the special print head cleaning pen included in the accessories of the scale to remove the dirt on it. Wait for two minutes. After the cleaning solution on the print head has fully evaporated, close the print head, push the printer back into the scale, close the plastic door, and power on to detect. After the print is clear, it can be used normally. Note: To clean the print head, you must use the cleaning pen that comes with the scale. If the cleaning solution in the cleaning pen is used up, you can find some clean soft cloth and wipe it with a little anhydrous alcohol. The automatic multihead weigher is strictly prohibited to use other cleaning fluids or wipe the print head with hard objects, otherwise it will cause damage to the print head.
The multihead weigher maintenance method is initialized. The automatic multihead weigher has the function of zero tracking and power-on clearing. It can clear the foreign objects on the weighing pan when it is turned on, and ensure that the scale is turned on when there is no wind around. If there is a little weight display after turning on the machine, you can press the“clear”key to return the scale to zero. The automatic multihead weigher should ensure that no foreign objects around the scale touch the sensor during the weighing process, and the bottom of the sensor should also be clean and free of foreign objects, otherwise it may cause problems such as inaccurate weighing.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Author: Smartweigh–Vertical Packaging Machine
Author: Smartweigh–VFFS Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved
