As packets of soy sauce, vinegar sales increase rapidly in the market, many enterprises adopt liquid packaging machine
production packaged products, but improper use can cause the phenomenon such as leakage, torn bags, seriously affecting the quality, solid wrote this article USES the cautions of liquid packing machine
Major parts of the liquid packaging machine
name as shown in figure 2.
Note: using liquid packaging machine (1) packing machine installed, should be put to the material container fresh water injection (
The volume fraction of 75% alcohol or alcohol)
, with rubber pipe sleeve to drain on the discharge pipe, open the machine runs 5 min, flushing pipe, to ensure the food hygiene.
(2) the temperature of heat sealing shaft heat sealing membrane to the best, depending on the material and thickness of the bag, fine-tuning again carefully, 30 min to make hot die head temperature preheating rear can filling production formally.
(3) adjust go bag side bar on the variable crank position, can get the bag length, adjusted to shorten into, the adjustment to extend outward, adjust good, before driving should be tighten nut and tighten.
Quantitative pump (4) adjust the side bar on the variable crank position, can be required for the size of the filling amount, adjust to reduce into, the adjustment to increase outward.
(5) filling material tank (
Barrels a day).
Liquid level highest position shall not be higher than the native 0 - quantitative pump
It is advisable to 5 m in to quantitative accuracy.
When infusion pipeline control valves and should not be in a closed when the phone is switched on.
Those should be regularly check the vertical and horizontal sealing die head, and in a timely manner to stick in the above clear out clutter, otherwise it will seriously affect the heat sealing effect.
Cleaning are not allowed to use metal tools or sandpaper scratches, otherwise easy to damage the working face, unable to use.
Should be after cooling, cloth or wooden tools with organic solvents to wipe, removal of foreign bodies.
Liquid packaging machine maintenance and maintenance (1) when the liquid packing machine stop using immediately with water rinse the residual liquid in the pipeline, or residual liquid spoiled or confusion will affect next flight quality of the products, if necessary, should be unloaded infusion plastic work ShuaLa brush MAO, and in a timely manner to wipe clean, keep the machine dry clean.
(2) per shift periodically check all moving parts and lubrication condition, and foot # 20 lubricating oil at any time.
Otherwise easy to not work properly, and seriously affect the service life of the machine.
(3) production in the winter, when the temperature is lower than 0 ℃, must use hot water to melt ice content of metering pump and the pipeline, otherwise will cause side rod break, or a machine cannot be started.
(4) the machine using a single piece of plastic film thickness should be in 80 & mu;
M, and shall ensure that the film tensile strength, uniform thickness, good lubrication performance, quality should be controlled under 18 kg per roll.
If you are looking to get started with weigher, it's important to find a quified . Let Smart Weigh
Packaging Machinery Co., Ltd be your provider. Visit us at Smart Weighing And Packing Machine.
With all the pros and cons of different in mind, click Smart Weighing And Packing Machine to learn more about and decide which weigher option is best for your case.
By building an connection around Smart Weigh and catering specifically to the craft beer crowd, Smart Weigh Packaging Machinery Co., Ltd was able to raise the capital and brand awareness needed to successfully break into the domestic market with a groundswell of support.