Language
The automatic roasting and roasting packaging machine is produced by Jiawei with after-vibration unloading. It will not let the material go directly to the tray or block the material at the outlet of the barrel. It is a type used to pack roasted and puffed materials, puffed food, etc. Shrimp crackers, peanuts, condiments and other granular or non-stick material powder packaging objects. Every machine needs regular maintenance. Everyone has reached a consensus. The maintenance suggestions for the Shuangli brand roasted seeds and nuts packaging machine: 1. Maintenance after production: Every day after production, employees must clean the machine before leaving get off work. The material barrel is cleaned in the bin, clean up the residual material in the material pan, keep it clean, clean up the residual material in other parts, and make preparations for the next use.
Second, lubrication of machine parts 1. The box part of the machine is equipped with an oil meter. All oil should be added once before starting up, and it can be added according to the temperature rise and operating conditions of each bearing in the middle. 2. The worm gear box must store oil for a long time. The oil level is high enough that the worm gear invades the oil. If it is used frequently, it must be replaced every three months. There is an oil plug at the bottom for draining oil. 3. When refueling the machine, don't let the oil spill out of the cup, let alone flow around the machine and on the ground. Because oil easily pollutes materials and affects product quality.
3. Maintenance instructions 1. Regularly check the machine parts, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other movable parts are flexible and abraded. Any defects should be repaired in time , Do not use reluctantly. 2. The machine should be used in a dry and clean room, and should not be used in a place where the atmosphere contains acids and other gases that are corrosive to the body. 3. When the roller moves back and forth during work, please adjust the M10 screw on the front bearing to the proper position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the proper position, adjust the gap so that the bearing does not make a noise, turn the pulley by hand, and the tension is appropriate. Too tight or too loose can cause damage to the machine. . 4. If the machine is out of service for a long time, the whole body of the machine must be wiped and cleaned, and the smooth surface of the machine parts should be coated with anti-rust oil and covered with a cloth canopy. The machine needs maintenance. The operator should use the machine correctly and clean it regularly during use.
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved