1, connected to the power supply, choose according to need to power off
on, the power indicator light is lit.
The power switch to vacuum for vacuum sealing, pointing to vacuum for vacuum sealing.
2, items will be equipped with vacuum bags placed indoor,
mouth neatly on the heat seal (
As for inflatable packaging
should have at least a chut 呾 inserted inside the mouth)
。
3, pressure board cover, front panel on extraction (
Vacuum)
Indicator.
Vacuum pump began to smoke gas, the machine cover is automatically suck
live, vacuum knob can be adjusted according to the packing requirements vacuum
degrees of adjustment, depending on the scale from low to high,
to small amplitude.
4, will need to vacuum bag packaging products, and then put the
end to seal and keep the bag flat straight,
if it is a small bag packing can also be more bags and side by side.
5, when extraction to set the time,
The vacuum degree required by)
, at the end of the suction, suction light is put out, the charging indicator, to start each inflatable.
Air knob adjustable air time length (
That is, how much your)
To the above method.
If you don't need air, turn the power switch to the position of the vacuum engineering sequence automatically in a vacuum packaging, inflatable light is put out.
6, extraction, or when the aeration, indicator light is extinguished, heat sealing indicator, namely in the process of sealing, the panel with heat sealing time and temperature control knob, to adapt to the different thickness materials, adjusting time and temperature, the gyration amplitude is smaller, prevent heat sealing temperature increased suddenly, burning hot sealing parts.
7, 8 inch, when to set heat sealing time the heat sealing light goes out, to inspect heat sealing end, namely vacuum chamber is entered into the atmosphere, electromagnetic valve cover until the machine automatically pick up rev, vacuum packaging process complete, ready for the next packaging cycle.
