Author: Smartweigh–Multihead Weighter
The multihead weigher is a commonly used testing instrument in the assembly line. The daily maintenance of the multihead weigher is indispensable. Today, the editor has compiled a few tips on how to maintain the multihead weigher. First, clean the automatic multihead weigher platform: after cutting off the power supply of the automatic multihead weigher, unplug the power cord. Wet the gauze and wring it dry, then dip a little neutral cleaning solution (such as alcohol) to clean the scale pan, display filter and other parts of the scale body.
The conveyor belt section that can be easily attached and detached can be washed with warm water. Wash once a week in warm water at about 45°C, and soak the automatic multihead weigher conveyor belt in boiling water for about 5 minutes. Second, clean the printer (if the device is equipped with a printer): cut off the power supply, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body.
Press the front of the printer, release the print head, and gently wipe the print head with the special printing cleaning pen included in the scale accessories. After cleaning and wiping, cover the pen cap to prevent the cleaning liquid in the pen from volatilizing, and then wait for two minutes until the print head is on the After the cleaning solution has fully evaporated, close the print head, push the printer back into the scale, close the plastic door, power on and test, and it can be used normally after the print is clear. Third, the cleaning of the main machine part: a. The power supply must be cut off to prevent the danger of electric shock, and then the automatic multihead weigher can be cleaned; b. When choosing cleaning tools, please use a cloth moistened with water or neutral detergent for cleaning; c. Do not use organic solvents such as thinners and benzene; prevent corrosion to objects and the body, affecting use; d. Do not use metal brushes to prevent scratches on objects and bodies; Fourth, the maintenance of automatic multihead weigher: a. Due to Contamination caused by touch and fingerprints, etc., can be wiped off with a sponge or cloth containing organic solvents (alcohol, gasoline, acetone, etc.) when neutral detergent or soap cannot be used; b. If rust cannot be removed with neutral detergent, please use cleaning liquid; c. For rust caused by iron powder or salt during automatic multihead weigher operation, you can use a sponge containing neutral detergent or soapy water or cloth to wipe, can be easily removed, wipe clean.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Combination Weighter
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved