​Maintenance knowledge of automatic packaging machine, prolonging the life of packaging machine, it is worth knowing

Author: Smartweigh–Multihead Weighter

After the purchase of a new automatic packaging machine, long-term use will cause loss. Mechanical equipment may, in some cases, wear out if it is not maintained properly. Therefore, it will cost a lot of money to find professional maintenance personnel for maintenance, which can be avoided.

It is necessary to carry out routine maintenance work on mechanical equipment. Good maintenance can greatly improve the safety and stability of machinery and equipment, allowing it to function properly. Let's take a look at the maintenance knowledge of mechanical equipment: 1. Inspection before the operation of mechanical equipment Before starting the operation, please confirm whether there is any fault or displacement of each device.

2. Check whether the screws and other parts are missing or loose. Please check once a month. In particular, the moving parts such as the fastening bolts and adjusting rods of the cam in the frame are easy to loosen, which may cause damage to some parts of the machine. 3. Grease filling Add an appropriate amount of grease to gears, cams and other transmission parts every day to prevent accelerated wear of parts due to lack of grease.

4. Air filter (bag taking and bag opening) Air filter is installed on the connecting pipe of bag taking, bag opening and solenoid valve control. Please check once a week and clean with an air gun if necessary. Replace if clogged badly.

5. The exhaust filter (at the vacuum distributor) has 3 air filter silencers in the open position of the vacuum chamber cover of the vacuum turntable. Depending on the use environment, it must be completely replaced every 5-7 days to prevent the air filter muffler from being blocked, and the vacuum in the vacuum chamber is not fully discharged when the lid is opened, thereby damaging the vacuum chamber lid 6. Reducer and cam distributor oil Amount: Keep the oil level between the maximum and minimum values ​​of the oil level mirror. Oil change: first change within 7-15 days and once every 3-6 months.

7. Maintenance of vacuum pumps and chillers Strengthening the maintenance of mechanical equipment can not only effectively reduce the failure rate of equipment, reduce maintenance costs and the number of spare parts reserves, but also greatly reduce downtime and improve the economic benefits of users, which is important to further improve the level of equipment management. significance.

Author: Smartweigh–Multihead Weighter Manufacturers

Author: Smartweigh–Linear Weighter

Author: Smartweigh–Linear Weigher Packing Machine

Author: Smartweigh–Multihead Weighter Packing Machine

Author: Smartweigh–Tray Denester

Author: Smartweigh–Clamshell Packing Machine

Author: Smartweigh–Combination Weighter

Author: Smartweigh–Doypack Packing Machine

Author: Smartweigh–Premade Bag Packing Machine

Author: Smartweigh–Rotary Packing Machine

Author: Smartweigh–Vertical Packaging Machine

Author: Smartweigh–VFFS Packing Machine