Language
Author: Smartweigh–Multihead Weighter
Usually, during the period of using machinery and equipment to supply raw materials, attention must be paid to the cleanliness of machinery and equipment. When the surface of machinery and equipment is stained with dirt or there is a lot of smoke and dust, it should be cleaned immediately to keep machinery and equipment clean, tidy and dry. In addition, in the whole process of applying machinery and equipment, it must be reviewed on time. Some machinery and equipment may have errors in the precision level due to long-term application, and even review can prevent the causes of deviations and ensure multihead weigher. the actual effect of precision. The overall design of the multihead weigher released today is effective, and ordinary workers must also carry out lubrication and maintenance on the machinery and equipment on time. After solving the problem, the actual effect of the operation of the machinery and equipment will be more stable, and higher productivity can be achieved.
Usually when using the multihead weigher, the staff should also pay attention to whether the wet area of the raw material meets the regulations. When the environmental humidity of the raw material is too high, the net weight of the raw material will increase, which will not only harm the precision, but also affect the equipment. It causes a certain amount of pressure, so this kind of maintenance expertise must be mastered in the whole process of applying the multihead weigher. The batching scale is generally composed of a scale body, a feeding organization, a feeding organization, and an electronic control system. 1. Feeding organization Generally, the feeding organization adopts cylinder arc-shaped door feeding, vibration feeding, screw feeding, centrifugal impeller feeding, air blowing feeding and other methods. Generally, sheet metal parts are used for cold production and processing.
2. Feeding organization Generally, the feeding organization adopts cylinder arc-shaped door feeding, vibrating feeding, spiral feeding, rotating vibrating feeder feeding or immediately using pneumatic (electric) gate valve feeding and other methods. Generally, the cold work of sheet metal parts is used for production and processing, or the rotary vibrating feeder and the (electric) dynamic gate valve are purchased immediately. 3. The scale body Most of the scale body uses metal materials such as angle iron, bad steel, square steel pipe, etc. as the key raw materials, and undergoes production processes such as electric welding, grinding, polishing, electrostatic spraying or spraying. In addition, some people also use concrete for key materials. As the leading method, the metal material is supplemented by the method.
Fourth, the electronic control system The circuit system is mainly composed of a weighing module and a manipulation module. In most places of the weighing module, the method of weight sensor + control board + electrical components is used for operation. This method has stable quality, relatively complicated adjustment, low engineering cost and simple function. In addition, a manipulation method that is often used is weight sensor + weighing transmitter + PLC + touch screen (industrial computer main board).
This method is cost-effective and stable, easy to adjust, simple to operate, rich in functions but high in engineering cost, so this operation method is the choice for large, medium and small customers.
Author: Smartweigh–Multihead Weighter Manufacturers
Author: Smartweigh–Linear Weighter
Author: Smartweigh–Linear Weigher Packing Machine
Author: Smartweigh–Multihead Weighter Packing Machine
Author: Smartweigh–Tray Denester
Author: Smartweigh–Clamshell Packing Machine
Author: Smartweigh–Combination Weighter
Author: Smartweigh–Doypack Packing Machine
Author: Smartweigh–Premade Bag Packing Machine
Author: Smartweigh–Rotary Packing Machine
Copyright © Guangdong Smartweigh Packaging Machinery Co., Ltd. | All Rights Reserved