Pillow maintenance: (
1)
Wipe clean pillow equipment, must turn off the power, to ensure the safety of the machine.
(
2)
Twist with clean wet cloth to wipe the machine work surface and outer surface, keep the from scratch, the cleaning and maintenance work on a regular basis.
(
3)
Use compressed air to remove feeding mechanism and the sealing products clastic and side sealing.
(
4)
With the steel wire brush to remove end of the coated with lubricating oil sealing adhesive film fragments on dao, if the packing materials remain on the sealing knife, this will affect the next round of product packaging, leading to poor packing effect (
5)
Solid state breaker burn, temperature control table damage, damage of thermocouple thermometer cannot control temperature, the repair method is to replace thermocouple, changing temperature control table, replace the heating element.
(
6)
There is a pillow , feed and the exit is residual product, must to cleaning, use air compressor for cleaning, the effect is also very beautiful.
Pillow
packaging machine maintenance of several key: clean, fastening, adjustment, lubrication and corrosion.
In the normal production process, each machine maintenance member should do, according to the
packaging machine equipment maintenance manuals and maintenance procedures, strictly carry out the maintenance work according to regulations cycle, slows the wear and tear of spare parts, eliminate the malfunction of the hidden danger, prolong the service life of the machine.
Pillow maintenance is divided into: routine maintenance, regular maintenance (
Points: primary care, secondary care, three-level maintenance)
, special service (
Points: to change garments according to maintenance, downtime maintenance)
。
Routine maintenance for the center with cleaning, lubrication, check and tighten, after machine work and work are required for routine maintenance.
Level 1 maintenance work was conducted on the basis of routine maintenance, the key work content is lubrication, tighten and check the related parts and its cleaning job.
Level 2 maintenance work, with emphasis on the check and adjust.
Specific check engine, clutch, transmission, transmission components, steering and braking components.
3 maintain focus on testing and adjusting, eliminate the problems and balance degree of wear parts.
To influence the equipment using the part of the performance and the place that has fault symptoms for diagnostic testing and stateful inspection, and then complete the necessary change, adjustment and troubleshooting, etc.
Change garments according to the maintenance is refers to the packaging equipment every year summer and before winter should focus on the combustion embellish system, hydraulic system, cooling system and starting system components such as testing and repair.
Outage maintenance refers to the packaging equipment due to seasonal factors,
) as the winter
When need to stop for a period of time should do well in cleaning, cosmetic, supporting, anti-corrosion, etc.
packing machine maintenance of its purpose is to ensure the accuracy of equipment requirements and normal operation, at the same time also can prolong the service life of .
Pillow packaging machine commonly used maintenance mainly includes the maintenance of friction pair, regular inspection of the connecting parts and fastening parts.
weigher has become a standardized way of dealing with checkweigher.
Excellent quality yet affordable best at
Smart Weighing And Packing Machine. Don't miss out!
There are so many factors that businesses have to weigh when producing weigher, and we are not going to pretend to grasp all of them.
